Hot Air Balloon Pocket Pillow with Pattern and Tutorial

Wednesday, April 18, 2012

HotAirBalloonPillow3 
Now that was a long title! I just wanted to get all the highlights into one place. First, this is a cute pillow pattern that has a pocket. The pocket just happens to be the basket for a small friend to ride in. And, this basket is attached to a beautiful hot air balloon.

And of course since I am crazy, and like writing up tutorials, especially complex ones like this one, and posting them for free access, this project comes with a self-drafted pattern and complete instructions! Enjoy!

A couple of notes first:

* I'd say a very advanced beginner sewer should attempt this. (That being said, for ambitious beginners with a passion for learning new skills, this is a great project to explore sewing curves.) Those of you out there who have far more sewing experience than that, this should just be a fun project.

* What do I mean by advance beginner? You'll need to be able to sew curved seams that lay flat, or at least have the time to try them out, (you'll be glad you did) and you'll need to be familiar with pattern notations. There are quite a few curves in this project and some involve more easing than others. I give a number of tips about doing these curves here in this tutorial, but for more learning and a visual, Google drunkards path quilting, or sewing curved quilt seams videos.

As for pattern notations, you'll need to be able to transfer pattern notations and follow my instructions about how to use them.

*I am not a quilter. I am a garment maker. So, this patchwork-style project is just that...a "style" project. Some parts are patch-worked together because I designed a single layer of fabric for the pillow facing. Some of my methods are a little non-traditional when it comes to true quilt-patchwork, but bear with me. The project turns out lovely in the end.

* And finally, this pattern transports a small friend who is approximately 3" wide by 6" tall. Or, it could carry a gift card to your favorite baby gear store too.

* I am making this particular pocketed pillow for a friend who is having a baby, VERY soon. I guess the pillow is really for the baby, not the friend, but you get what I mean. Anyway, this little soft accessory makes a great baby shower gift and when constructed from quality cotton fabrics, is also a sweet heirloom-type gift. I hope my recipient likes it very much!

Materials:
Hot Air Balloon Pillow Pattern download here
Computer and printer
Paper scissors
Disappearing ink pen and a pencil
Use quilting cotton, or another such light fabric in a natural fiber
    1/4 yd to be the sky
    1/4 yd for the balloon
    1/4 yd for the basket
    4" X 8" scrap for the ropes
    1/2 yd for the back pillow panel
Ruler (a quilter's ruler is helpful)
Slide ruler (nice, but not necessary)
Straight pins
Fabric scissors
Matching thread
Sewing machine
16" X 16" pillow form

How To:

1. Wash, dry, and press fabrics.

2. Download and print pattern pieces. Cut them out with a paper scissors.

3. Align grain line of pattern pieces to the grain line of the fabric (they should run parallel), trace around each piece with a disappearing ink marker (or other writing implement of your choice) and transfer all pattern marks with a pencil to the right side of the fabric.
DSC_1312
HINT: This is how I transfer pattern marks that are not along the edge of the pattern piece. I simply, fold back the paper pattern at the notation and mark with a pencil this spot on the topside of the fabric. If your paper isn't transparent, you could use a straight pin. With the pattern piece flat against the fabric, push the pin tip through the pattern paper into the fabric below. Lift the paper pattern and mark the dot where the pin is sticking into the fabric below.

Some pattern pieces are meant to be cut on the fold, so watch out for this (these pieces are noted as such on the patter pieces themselves.) Remove pattern pieces and cut the pieces out with a fabric scissors. (If you'd rather print the pieces, trace them onto pattern paper, pin the pieces to the fabric, and cut both the paper and the fabric together, by all means this works too.)

Cut list: (You should end up with...)
Balloon:
(2) pieces of  #6 Balloon Stripe (C)  (they should be mirror images of each other.)
(2) pieces of #7 Balloon Stripe (B)  (they should be mirror images of each other.)
(2) pieces of #8 Balloon Stripe (A)  (they should be mirror images of each other.)
(1) piece of  #9 Middle Balloon

Sky:
(2) pieces of #5 Sky (D)  (they should be mirror images of each other.)
(1) piece of  #4 Sky (E) (cut this piece on the fold)
(2) pieces of #2 Sky (F) (they should be mirror images of each other.)
(1) piece of Sky (G) (there is no pattern piece #1; this is number one) that measures 3 1/2" X 17"

Basket:
(3) pieces of #3 Basket (cut this piece on the fold)

Ropes:
(4) 1" X 8" rectangles

Pillow Back:
(2) 17" X 11 3/4" (I chose to use the basket fabric for this one.)

Sew the Balloon
(Use a 1/2" seam allowances through out the project.)

4. Lay the #9 Middle Balloon piece right side up. Overlay the right hand side #8 Balloon Stripe (A), wrong side up.

DSC_1316
DSC_1317
Align the raw edges on the right side, match center marks and pin at the center. Match each raw end and pin. **This is where things can get a little tricky sewing curves. This is my tip for pinning angled seams so that the edges match up when everything is sewn together...which is critical for this project.**


MarkingSeamAllowance
HINT: Measure and mark the 1/2" seam allowance on both pieces at the beginning and end of the seam. The picture above is the end of the seam on piece #9 and on right hand #8.


DSC_1322
Match the marks and pin the layers in place. These marks are where the thread should sew through allowing the pieces to open in alignment.


DSC_1323  
This is the piece flipped over. Notice that there is that triangle that sticks out. This is good. The measured seam allowance mark tells you how large a triangle should be there. Start sewing in the crotch of the beginning "V" and finish sewing in the crotch of the other "V". 


DSC_1327 DSC_1329
Open the piece, make sure the top and bottom raw edges are aligned, close the piece, press the seam to one side, and trim the extra triangles flush with the rest of the piece. Presto, perfectly aligned edges, with an angled seam. 

DSC_1328
So, back to the matched #9 Middle Balloon and right hand side #8 Balloon Stripe (A) pieces...Start sewing in the crotch of the "V" and continue through to the other "V". (You don't need to back stitch here, like in quilt patchwork, because the beginning and end of the thread will get caught up in subsequent seams.) Open the piece and make sure the top and the bottom of the piece are parallel.

DSC_1332
Close the piece, trim the seam allowance to 1/4", snip small cuts into the seam allowance where the fabric is curved so that both pieces will lay flat when open. Open the piece and press the seam to one side with a hot iron. The fabric will probably naturally want to go toward the #9 Middle Balloon piece.

5. Repeat this process with the left side of the #9 Middle Balloon piece and the left hand side #8 Balloon Strip (A) piece.

6. Now repeat this process with the remaining balloon pieces, first #7 then #6, in order. When you have finished the Balloon portion, it should look like this...

DSC_1339
**As the curves become sharper, that is, less like straight lines, the stitching tends to get more sensitive. If you aren't careful, puckers, folds, and miss-alignments can occur. Here are my tips for how to sew nice curved seams that stay flat.** (In all honesty, these tips are probably already out there on the Internet somewhere, but these ones are just the ones that happened to help me most.)

HINT
*Go slow. Stitch slowly. Leave your needle down through the fabric, pause, lift the presser foot and check both layers of fabric to make sure that they are flat within the seam allowance. Lower the presser foot and continue on.
*Pin the middle, the beginning, and the end. One layer is curved one way. The other layer of fabric is curved the other way. The one that looks like it has a bite taken out of it, or the one that is concave, is the one that "seems" shorter. This layer needs to stretch to "meet" the other fabric Don't put too many pins in, because you want to be able to work with this stretchy bias-cut fabric. Gently, and evenly, stretch the concave piece to meet the edge of the other curve (or the convex piece). Match the edges together with your fingers and gently guide them slowly through the machine. 
*Work to aim for those "V" crotches. This will align the edges once the pieces are opened.
*Don't bother back stitching at the beginning or the end. If you don't like the seam at the end it is easy to rip it out and start over. 
*Clip perpendicular to the seam within the seam allowance along the curves to let the seam allowances lay flat behind the piece.

Sew the Ropes
DSC_1355
7. Fold one rectangle in half lengthwise, wrong sides together, and press with a hot iron. (Second mock-up from the left.) Unfold this and fold each raw edge to meet the center crease and press. (Third mock-up from the left.) Fold the piece in half again lengthwise and press. (Mock up at the far right.) Repeat with the remaining three rectangles and then set these aside.

Sew the Sky - Part 1
That sounds kind of funny. And by the way, my sky is pink.

DSC_1347
8. Lay the #4 Sky (E) piece right side up, and overlay the right hand side #5 Sky (D) matching the dots. Sew them together with a 1/2" seam allowance. Trim the seam allowance to 1/4" and press the seam toward the #5 piece. Repeat with the left hand side #5 Sky (D) piece. (Yes, you can see the seam allowance, but this will be rectified once this sky piece is stitched to the Balloon piece. Just a note, in the photo below, the seam allowance is folded the wrong way.)

DSC_1359
9. Match one end of one rope piece with the marks at the bottom of the #4 Sky (E) piece and pin in place, making sure that the open edge is facing away from the center line. Match the top of the rope piece with the mark on the attached #5 Sky (D) piece and pin in place. Both the top and the bottom of the rope piece should extend beyond the sky pieces. Baste the rope piece in place. Repeat with the other three rope pieces, making sure that the open edges face away from the center line.

10. Edge stitch both long edges of each rope piece and remove basting stitches. Trim the rope pieces that extend beyond the sky pieces so that they are flush.

Attach the Balloon to the Ropes
11. Fold the Sky piece you just finished in half, matching left and right edges and finger press the center crease. Fold the finished Balloon piece in half, matching left and right edges and finger press this center crease. Open both pieces, overlay them with right sides together, match center creases and pin. (This is going to be just like piecing the curved balloon pieces.) Remember my "sew in the crotch of the "V" hint" and how to align the curved edges to get that "V"? Do that now, and pin matched left and right corners. Match edge markings and pin. In all, there should be five pins holding together the sky/ropes piece and the balloon piece.

Take a deep breath, and start in the center crease of the balloon and stitch out to the side each ways. Go slow. Make it even. Trim the seam allowance to 1/4" and snip the curved seam allowance of the sky piece to allow it to "stretch" and lay flat around the curve and press the seam to one side.

Stand back and admire for a moment, and congratulate yourself knowing that was the last curved seam.

Sew the Sky - Part 2
12. Lay the right hand side #2 Sky (F) piece right side up, and overlay the #3 Basket piece wrong side up. Match edges (per my hints above about the V's), pin and sew. Trim seam allowances to 1/4" and press to one side. Repeat with the left hand side #2 Sky (F) piece.

DSC_1360
13. Lay the Balloon piece right side up and overlay the just completed Sky/Basket piece over top, matching edges and pin. (When the piece is unfolded, the most left and most right ropes should align with the edge of the basket piece. It should look like the ropes attach the basket to the balloon.) Sew, trim the seam allowance to 1/4", and press toward the basket piece.

14. Lay the Balloon piece right side up and overlay the #1 Sky(G) piece wrong side up (The sky piece for which there was no pattern piece.) (When the finished piece is opened, this last sky piece should be sewn to the bottom of the basket.) Match edges, pin and sew. Trim seam allowance to 1/4" and press toward the last Sky (G) piece.

Sew the Basket

DSC_1361
15. Align the two remaining #3 Basket pieces together, right sides together and pin. Sew around the basket piece, leaving a 2" opening at the bottom of the basket, back stitching at the beginning and the end. Above, you can see the 2" opening I've marked and will not sew beyond.

DSC_1363
Trim the seam allowance to 1/4", trim the corners, and turn the piece right-side out. Use a pencil or chopstick to push out the corners and press.

DSC_1380
16. Align the basket piece atop the patchworked basket shape and pin. Edge stitch around the basket perimeter, starting 1" from the top right corner, continuing down the right side, on to the bottom, up the left side, and 1" past the top left corner. Back stitch at the beginning and the end.

DSC_1382
Pour yourself a glass of something good to drink and say "cheers" the pillow front is finished!

Finish the Pillow Back

DSC_1385
17. On one pillow back piece, along one 17" edge, stitch 1/4" from raw edge. Fold wrong sides together and press along this stitch line, pin and then edge stitch. Then fold the finished edge up to make a 1" hem, press, pin, and edge stitch again.

Repeat with other pillow back piece.

DSC_1386
18. With wrong fabric sides facing up, overlap finished edges of pillow back pieces so that the total back pillow panel should measure 17" X 17". Pin, and baste each overlaped edge within the 1/2" seam allowance.

DSC_1387
19. Lay back panel right fabric side up, and overlay the balloon patchwork panel wrong side up and pin. Stitch all the way around, back stitching at the beginning and the end. Trim corners and turn the work right side out through the opening in the back panel. Stuff the pillow case with the pillow form and insert your favorite friend into his/her new sweet hot air balloon.

  HotAirBalloonPillow2

If any of these instructions aren't clear, or if there is an error, please leave me a note! This tutorial is my first of its kind, (I have many more ideas I can't wait to share) and I've had it all running around and around in my head. I hope that everything came out correctly, but with a teething infant, and my sever lack of sleep, I can't be too sure. Thanks!

Felt Coffee Cup Sleeve Tutorial - Flower Pattern

Thursday, April 5, 2012

BlueFlowerCoffeeSleeveB

This flower pattern was actually the primary inspiration for this felt coffee cup sleeve run. After finishing a simpler pattern, I decided to give this original, more complicated, flower petal pattern another go. Reverse applique is sometimes a little tricky. But since we are in the spring season, and flowers are coming out all over to greet us, and allergy symptoms are flaring up, I felt this tea-time sleeve is still worth a go.

Last week a stumbled upon a wonderful embroidery technique called Sashiko. It is a Japanese quilting stitch actually and I've seen, and fallen in love with, all kinds of crafts that showcase this wonderful design style. I've even tried stitching a couple of designs myself. But to get that stitch length just right is harder than you might think. And so, instead of stitching a Sashiko coffee cup sleeve, I created this flower design in the same colors as those beautiful traditional Sashiko designs. Navy and white of course. After all, I would suspect, not being Japanese myself, that there might be more tea drinking in Japan than coffee anyway.

BlueFlowerCoffeeSleeve2
Materials

  • Felt in two contrasting colors (This is 100% wool felt I found here. A poly blend wool would suffice as well.)
  • Printed Blue Flower Coffee Cup Sleeve pattern (download here)
  • X-acto knife and thick magazine to cut on
  • Disappearing ink pen
  • Sewing machine
  • Coordinating thread
  • Fabric scissors (a very small pair would be helpful to cut out the flower petals.)
  • Sewing needle - for hand sewing
  • Wide mouth mason jar, 16 oz size

How To
BlueFlowerCoffeeCuff3 
2. Transfer pattern to felt fabric top layer. I chose white as my top layer. I also chose to cut out the petals around the solid lines with an X-acto knife and then trace inside the cut outs onto the white felt with a disappearing ink pen. If you have another method of pattern transfer, please feel free to use it.

BlueFlowerCoffeeCuff4 
3. Machine stitch around patterned lines and around the entire perimeter of the sleeve, back-stitching at the end. (Start stitching at the center of the pattern to keep the felt pieces straight. Cut the threads close to the fabric each time you finish a petal. This way, they don't pull the felt out of whack by "stringing" the thread between the petals, and the "tails" don't get caught in the next seam.) Your petal seams need not be perfect. Don't worry. I did worry and then I told myself to stop worrying and it all came out looking great anyway.

BlueFlowerCoffeeCuff5
4. Carefully, with the tip of the fabric scissors, lift the top felt layer and snip a small hole. Then insert the tip of the scissors and cut out the petal shape just inside the stitching. Be careful to not snip through the bottom felt layer, or through your stitches. This will create the reverse applique look.

5. Fit the sleeve around the mason jar and whip stitch the edges together by hand so that they lay flush and do not overlap.

BlueFlowerCoffeeSleeve1

6. Put your water on to boil and take out your tea leaves. Pour, dunk, and brew yourself a nice cup of tea to enjoy useing your new blue flower coffee/tea cup sleeve.

Felt Coffee Cup Sleeve

Wednesday, April 4, 2012

FeltCoffeeCuffA

I don't recall where I saw something similar to this craft I am sharing today. Someone's blog, somewhere, at some point in time...I remember their design was different for sure, but the idea of a coffee cup sleeve for a mason jar is unabashedly the same. So if you are that blogger, and I gleaned that idea from you, please do drop me a note, so that I might acknowledge your wisdom here.

Hands. I believe they are for doing, for learning, and for creating. I feel blessed, and lucky, to possess two that work well. Each day I try to do as much with them as I can in anticipation of the time that they tire and will want to work no more.

What is more amazing to me is how baby hands develop. Fat fingers start out slow and clumsy. Aiming and grasping are tiresome and challenging tasks. Accuracy and firmness of grasp aren't yet refined. The delicate is smooshed. The thin is impossible to lift. And then fingers and hands learn. They get stronger, agile, and adventurous.

Hands and fingers are personifications of personality I believe. My mother's family all had the same hands. They all looked the alike. To this day, I have to think twice when I call my Aunt and just be sure I am not calling my mother. I look at my boys and they have sturdy hands, with wide fingers and broad palms. My little girl has delicate hands, with long slender fingers. And her hands are the perfect size to hold these mason jars.

FeltCoffeeCuff8

This sleeve pattern fits a 16 oz, pint sized, wide mouth mason jar. I tested this sleeve around the thick glass mason jar filled with boiling water and the felt fabric aptly insulated my tender fingers and the glass proudly withstood the high temperature.

Materials
  • Felt in two contrasting colors (I used 100% wool felt found here. The regular craft store poly-blend will do just fine too, or you can use a felted wool sweater deconstructed.)
  • Cotton embroidery thread in complementary color (I used regular DMC floss in ECRU)
  • Paper scissors
  • Fabric scissors
  • Pen
  • A simple sewing needle
  • Sewing machine and matching thread is optional
  • Printed Felt Coffee Cup Sleeve Pattern (download here)
  • Wide mouth mason jar--16 oz size 
How To

1. Download and print out Felt Coffee Cup Sleeve pattern.

FeltCoffeeCuff1 FeltCoffeeCuff2
2. Cut out the pattern along solid lines with a paper scissors. Lay the pattern on the felt fabric color that will be on top and cut away. Trace the hand cut-outs with a pen.

FeltCoffeeCuff3
3. Cut the top felt fabric along the pen lines with a fabric scissors. You can turn over the cut out fabric if there is still pen lines that show.

4. Lay pattern on the felt fabric color that will be the bottom layer and will show through. (In this case the red felt.) Trace around the perimeter of the pattern and cut it out. This second felt piece should be almost rectangle and solid.

5. Overlay the layers of felt fabric and begin stitching. (The layer with the cut outs should top the rectangle solid layer.)

6. Use a running stitch and stitch around the felt cut outs.

FeltCoffeeCuff4FeltCoffeeCuff5
Note: I hid my beginning and ending knots between the layers of felt. Edge stitching around the perimeter of the sleeve later will hide everything nicely.

FeltCoffeeCuff6 
7. Stitch around the perimeter edge of the sleeve with a sewing machine, or hand stitch.

8. Pre-fit the sleeve around the mason jar and make sure the edges come together. (If there is a small gap don't worry, the felt will stretch a bit and the edges will come together.) Whip stitch the edges together with embroidery floss so that they lay flush, without overlapping.

9. Now brew your favorite cup of coffee, or tea in my case, slip the sleeve around the mason jar and pour yourself a cup and enjoy.

Outtakes:
This is what happened during our first shoot...little fat adventurous baby hands happened...
FeltCoffeeCuffExtras
Related Posts Plugin for WordPress, Blogger...
Blog contents © Abbie Giving 2010. Blogger Theme by Nymphont.